2-Inch Lead-Free Cocktail Ice Stamp
A custom design in lead-free brass, cut with relief for a distinct impression on ice. Made for the final detail on your next cocktail. Material documentation is published before orders open.
Your artwork, checked at the size it will be made.
Your bar’s logo. Your initials. Your maker’s mark. Turn the detail that’s yours into a custom metal stamp—and check how it holds up at its final size before you order.
Making leather goods? Explore custom brass maker’s-mark stamps.
Every stamp starts the same way: your artwork, checked at its final size, cut in deep CNC relief and approved as a proof. Choose where it will be used.

Bismuth lead-free brass on turned walnut. The fastest melt and a warm heirloom patina.

Bright brushed steel with no brass patina and easy commercial washdown.

Your monogram on every pour, a date reverse-planner, and a keepsake for every anniversary.

Volume tiers from two sets, interchangeable menu heads and a cost-per-pour calculator.
A good mark starts before the metal is cut. It starts with the right scale, enough space between the lines, and a clear idea of the impression you want to leave.
Upload a logo or monogram and see it at the finished size. Fine lines and tight gaps are flagged before anything is cut. The check is a starting point; your final proof is reviewed before machining.
Check your logo at 2 inchesThe background is recessed so the raised design has clearance to meet the ice. Final geometry is confirmed in your production proof—because more depth alone won’t rescue a line that is too fine.
How deep relief worksTemper the ice, stamp a flat surface, and use brief, steady contact. Practice on a spare cube before service and find the timing that works for your ice and your design.
Read the ice-stamping guideA fine line can disappear. A small gap can close. Our free checker looks for those details at the size you plan to stamp, so you can make a more informed choice before committing to metal.
Upload a logo, choose ice or leather, and see which areas may need more room. The check is a starting point; your final proof is reviewed before machining.
Runs in your browser. No account. A screening result is not a guarantee of a sharp impression—ice, contact time and material still matter.
Same ice, same monogram, same pour. The difference is what happens to meltwater in the first seconds of contact, and that is decided by relief depth and artwork spacing long before the stamp meets the ice.
Depth alone does not rescue a hairline, and a clean file still needs tempered, flat ice. The 0.50 mm / 0.80 mm values are screening guidelines; your proof confirms the final geometry.
Ice stamps and leather stamps are separate products, with separate materials, specifications, and uses.
A custom design in lead-free brass, cut with relief for a distinct impression on ice. Made for the final detail on your next cocktail. Material documentation is published before orders open.
The finishing detail on something you made. Your name, initials or logo, CNC cut to at least 2.8 mm of relief so it debosses 4–10 oz vegetable-tanned leather cleanly, without a bruised halo around the mark. Mallet rod included; the M8-tapped head also fits an arbor press.
Custom ice stamps for cocktail bars, hotels and restaurants, with volume tiers and interchangeable menu heads.
Explore bar & hospitality stampsCustom brass stamps for a leather maker’s name, initials, or logo.
Explore leather stampsStart with the artwork, plan backwards from the date, and give your bar team a simple handoff checklist.
Explore wedding monogram stamps
Every Velt & Forge head screws onto its handle on a standard M8 brass thread. Keep one turned walnut or solid 304 steel handle and add a second custom head, cut to the same relief depth and checked the same way, for $49 instead of buying a second complete stamp.
“Brass” covers dozens of alloys. Here is where our bismuth lead-free eco-brass target specification sits next to the US lead-free threshold and the leaded brass common in general machining.
At ~0.0022% Pb, our target alloy sits over 110 times below the 0.25% NSF/ANSI 372 lead-free threshold, and over 1,000 times below the bottom of the C36000 range. On a linear scale our bar is barely a sliver; switch to the log view to see all three.
Studio images of the intended design, materials and packaging. Photos of production samples—including real impressions on ice—will be published before orders open.
The artwork is machined mirror-image so the impression reads the right way round. The fine rings are tool paths from the cutter; final relief depth is confirmed in your proof.
Lead-free brass with a walnut handle, or a 304 stainless face (+$15) and knurled steel handle (+$18). Steel conducts heat more slowly, so expect a longer contact time on ice.
A rigid charcoal box with a linen pouch, a brass coaster and a care card. Packaging shown is the intended presentation; contents are confirmed before launch.
What is it made from? Will your artwork work at this size? When will it leave the workshop? Find the material information, review your proof, and see your dispatch estimate before you commit.
Clarity, tempering, a flat surface, contact time, and line width—an interactive checklist that separates ice problems from artwork problems.
G-02 Materials & complianceLeaded free-machining brass, lead-free copper alloys and 304 stainless steel—plus Prop 65 context and four questions for any vendor.
A good mark starts before the metal is cut. It starts with the right scale, enough space between the lines, and a clear idea of the impression you want to leave. We make custom stamps for that final detail—on a cocktail, a leather piece, or a day worth remembering.
Upload your logo, choose ice or leather, and see your mark at its final size—in lead-free brass or 304 stainless steel. Free, private, and no signup.