Pre-launch preview · Preview your maker’s mark on leather Free tool. No signup.
Pre-launch preview. Orders are not open yet. Preview your maker’s mark on leather and save a configuration in the studio.
For the workbench · Maker’s mark

Custom Deep-Engraved Brass Leather Stamp

US$892-INCH · SOLID BRASS

The finishing detail on something you made.

Your name, initials or logo, CNC cut in solid brass with a deep, clean relief, so the mark debosses crisply into cased vegetable-tanned leather without bruising the leather around it.

  • Relief depth target ≥ 2.8 mm, confirmed in your proof.
  • Brass mallet rod included on an M8 thread, or use the head alone in an arbor press.
  • Artwork checked at final size: thin lines and tight gaps flagged first.
  • Cut mirror-image, so your mark reads the right way round.

01 Find your size

Face size

Wallets and cardholders suit 1.5″; bags and belts usually take 2″. Larger faces need more force; see the pressure guide below.

02 Fitting

Included

The head is tapped M8 either way, so you can switch between mallet and press later.

03 Add a second mark

Optional · M8 thread
Your configuration · USD$89.00
2-inch (50.8 mm) · Solid brass · Brass mallet rod (M8)
Start My Leather Stamp — US$89 Preview My Mark on Leather

Your proof comes before machining. Shipping and any applicable taxes are shown before checkout. In this preview, no order is submitted and no payment is taken.

See your estimated dispatch date before checkout. Production starts after proof approval.
≥ 2.8 mm reliefNo background halo Checked at actual sizeLines and gaps flagged first Proof before machiningNothing is cut until you approve Mallet or pressM8-tapped head
Why depth matters on leather

No halo.
Just your mark.

When a stamp is pressed into cased vegetable-tanned leather, the raised mark sinks in, often a millimetre or more on 4–10 oz hides. If the relief is shallow, the stamp’s recessed background reaches the leather too and compresses a dull outline around your mark: the background halo, or bruising, that makes a maker’s mark look cheap.

We cut to a relief depth target of at least 2.8 mm, so the background floor stays clear of the leather even on thick, well-cased hides. Only the mark itself is debossed, with crisp walls and a clean field around it.

Depth isn’t the whole story. Fine lines still need room. We screen strokes and gaps at your final size and show you the proof before machining.

Macro of a brass stamp face with a raised mirror-image monogram standing well above a deeply recessed, tool-marked background
Deep CNC relief. The concentric rings are cutter paths on the recessed floor, well below the raised mark that meets the leather. Studio macro.
Casing & pressure guide

Damp leather, firm hand,
one impression.

Starting points for vegetable-tanned leather. Every hide behaves a little differently, so always test on an offcut from the same piece first.

Guidance, not guarantees. 1 oz ≈ 0.4 mm. A granite or marble slab under the leather makes every method more consistent.
Leather weight1.5″ · 38 mm2.0″ · 50 mm2.5″ · 63 mm
4–5 oz · 1.6–2.0 mm
wallets, cardholders
Mallet: one firm strike with a poly maulMallet or arbor pressArbor press recommended
6–7 oz · 2.4–2.8 mm
bags, journal covers
Mallet or arbor pressArbor press recommended; heavy maul possibleArbor or hydraulic press
8–10 oz · 3.2–4.0 mm
belts, straps, holsters
Heavy maul or arbor pressArbor pressHydraulic press recommended
  1. 01

    Case it.

    Dampen the grain side evenly with a sponge. Wait until the color comes back almost to natural and the surface feels cool, not wet. Too wet and the edges go soft; too dry and the mark is shallow.

  2. 02

    Set it square.

    Leather on a stone slab, stamp flat and square. Mallet: hold the rod upright and strike once, squarely. Press: bring the ram down with steady, even pressure.

  3. 03

    Strike once. Let it dry.

    Avoid a second strike; it rarely lands in the same place and doubles the edges. Let the leather dry fully before dye or finish.

Quick specification

What you’re
actually getting.

Pricing matches the Studio exactly. Ice and leather stamps are separate products: a head used on leather, dyes or finishes stays in the workshop. If you want your mark on the bar too, see our lead-free brass ice stamp.

Relief depth and tolerances are measured on production samples before launch.
MaterialSolid brass, CNC machined
Sizes & prices1.5″ / 38 mm $69 · 2.0″ / 50 mm $89 · 2.5″ / 63 mm $109
FittingBrass mallet rod on M8 thread (included), or head only, M8-tapped for arbor press
Extra headSecond custom head on the same M8 thread, +$49
Relief depthTarget ≥ 2.8 mm, confirmed in your proof
Best onCased vegetable-tanned leather, about 4–10 oz (1.6–4.0 mm)
ArtworkSVG, PNG or JPG; checked at final size and cut mirror-image
ApprovalDigital proof approved before machining
Questions

Before you
make your mark.

As the raised mark sinks into cased 4–10 oz leather, a shallow stamp’s background floor reaches the surface too and presses a dull outline, a halo, around the mark. A relief depth of at least 2.8 mm keeps the background clear of the leather, so only your mark is debossed.

A 1.5-inch face works well with one firm strike from a poly or rawhide maul. For 2-inch faces an arbor press gives a more even impression, and for 2.5-inch faces we recommend an arbor or hydraulic press. The included mallet rod and the M8-tapped head support both.

Vegetable-tanned leather from about 4 to 10 oz (1.6–4.0 mm), cased with water before stamping. Chrome-tanned and heavily finished leathers don’t hold a deboss well.

1.5-inch (38 mm) $69, 2-inch (50 mm) $89 and 2.5-inch (63 mm) $109, with a brass mallet rod included. A second custom head on the same M8 thread is $49.

No. Once a head has touched leather, dyes or finishes, keep it in the workshop. If you want a mark for the bar too, order a separate ice head.

For the workbench

See your mark
pressed into leather.

Upload your logo and preview the deboss on leather at its final size, with fine lines and tight gaps flagged before anything is cut.

Pre-launch preview: no order is submitted and no payment is taken.