Concept and studio images show the intended design. Round and square faces shown are illustrative; your face size and shape are confirmed in the proof.
Custom Deep-Engraved Brass Leather Stamp
The finishing detail on something you made.
Your name, initials or logo, CNC cut in solid brass with a deep, clean relief, so the mark debosses crisply into cased vegetable-tanned leather without bruising the leather around it.
- Relief depth target ≥ 2.8 mm, confirmed in your proof.
- Brass mallet rod included on an M8 thread, or use the head alone in an arbor press.
- Artwork checked at final size: thin lines and tight gaps flagged first.
- Cut mirror-image, so your mark reads the right way round.
01 Find your size
Face sizeWallets and cardholders suit 1.5″; bags and belts usually take 2″. Larger faces need more force; see the pressure guide below.
02 Fitting
IncludedThe head is tapped M8 either way, so you can switch between mallet and press later.
03 Add a second mark
Optional · M8 threadYour proof comes before machining. Shipping and any applicable taxes are shown before checkout. In this preview, no order is submitted and no payment is taken.
No halo.
Just your mark.
When a stamp is pressed into cased vegetable-tanned leather, the raised mark sinks in, often a millimetre or more on 4–10 oz hides. If the relief is shallow, the stamp’s recessed background reaches the leather too and compresses a dull outline around your mark: the background halo, or bruising, that makes a maker’s mark look cheap.
We cut to a relief depth target of at least 2.8 mm, so the background floor stays clear of the leather even on thick, well-cased hides. Only the mark itself is debossed, with crisp walls and a clean field around it.
Depth isn’t the whole story. Fine lines still need room. We screen strokes and gaps at your final size and show you the proof before machining.
Damp leather, firm hand,
one impression.
Starting points for vegetable-tanned leather. Every hide behaves a little differently, so always test on an offcut from the same piece first.
| Leather weight | 1.5″ · 38 mm | 2.0″ · 50 mm | 2.5″ · 63 mm |
|---|---|---|---|
| 4–5 oz · 1.6–2.0 mm wallets, cardholders | Mallet: one firm strike with a poly maul | Mallet or arbor press | Arbor press recommended |
| 6–7 oz · 2.4–2.8 mm bags, journal covers | Mallet or arbor press | Arbor press recommended; heavy maul possible | Arbor or hydraulic press |
| 8–10 oz · 3.2–4.0 mm belts, straps, holsters | Heavy maul or arbor press | Arbor press | Hydraulic press recommended |
- 01
Case it.
Dampen the grain side evenly with a sponge. Wait until the color comes back almost to natural and the surface feels cool, not wet. Too wet and the edges go soft; too dry and the mark is shallow.
- 02
Set it square.
Leather on a stone slab, stamp flat and square. Mallet: hold the rod upright and strike once, squarely. Press: bring the ram down with steady, even pressure.
- 03
Strike once. Let it dry.
Avoid a second strike; it rarely lands in the same place and doubles the edges. Let the leather dry fully before dye or finish.
What you’re
actually getting.
Pricing matches the Studio exactly. Ice and leather stamps are separate products: a head used on leather, dyes or finishes stays in the workshop. If you want your mark on the bar too, see our lead-free brass ice stamp.
| Material | Solid brass, CNC machined |
|---|---|
| Sizes & prices | 1.5″ / 38 mm $69 · 2.0″ / 50 mm $89 · 2.5″ / 63 mm $109 |
| Fitting | Brass mallet rod on M8 thread (included), or head only, M8-tapped for arbor press |
| Extra head | Second custom head on the same M8 thread, +$49 |
| Relief depth | Target ≥ 2.8 mm, confirmed in your proof |
| Best on | Cased vegetable-tanned leather, about 4–10 oz (1.6–4.0 mm) |
| Artwork | SVG, PNG or JPG; checked at final size and cut mirror-image |
| Approval | Digital proof approved before machining |
Before you
make your mark.
As the raised mark sinks into cased 4–10 oz leather, a shallow stamp’s background floor reaches the surface too and presses a dull outline, a halo, around the mark. A relief depth of at least 2.8 mm keeps the background clear of the leather, so only your mark is debossed.
A 1.5-inch face works well with one firm strike from a poly or rawhide maul. For 2-inch faces an arbor press gives a more even impression, and for 2.5-inch faces we recommend an arbor or hydraulic press. The included mallet rod and the M8-tapped head support both.
Vegetable-tanned leather from about 4 to 10 oz (1.6–4.0 mm), cased with water before stamping. Chrome-tanned and heavily finished leathers don’t hold a deboss well.
1.5-inch (38 mm) $69, 2-inch (50 mm) $89 and 2.5-inch (63 mm) $109, with a brass mallet rod included. A second custom head on the same M8 thread is $49.
No. Once a head has touched leather, dyes or finishes, keep it in the workshop. If you want a mark for the bar too, order a separate ice head.